2 ft x 8 ft Galvanized Spray Rib Lath - 3.4

Spray Lath is a West Coast product, where stucco is spray applied to the surface of the lath to build up the stucco thickness. Kraft paper is factory applied to prevent over spray of stucco. The spaces between the strips of Kraft paper allow for the visual alignment of the sheet for mechanical attachment of the ribs to the substrate. Rib Lath is often attached directly to the vertical framing members without a solid board substrate included.

View Details

Goto Wusheng Hardware to know more.

3/8" Hi-Rib Metal Lath with Paper

CEMCO&#;s 3/8&#; Hi-Rib Lath is the most rigid of all metal laths. With full 3/8&#; ribs longitudinally spaced at 4&#; apart, and a 1/8&#; rib between them. Hi-Rib lath is able to span up to 24&#; on center. The 3&#; strips of K-Paper attached to the spaces between the 3/8&#; ribs to minimize blow through of plaster when machine applied. This lath can be used in both vertical and horizontal applications. All CEMCO expanded metal lath is produced from standard G60 hot-dipped galvanized steel. G90 is available upon special request.

If you are looking for more details, kindly visit 3.4 Spray Rib Lath.