How to Install Laminate Wood Flooring Roll?

Laminate wood flooring is a great option for those looking for a stylish and affordable flooring solution. Not only is it easy to install, but it also comes in a range of different styles and finishes. Whether you're looking for a sleek and modern look or a rustic and traditional feel, there is a laminate wood option to suit your needs.

If you're new to DIY flooring installation, don't worry - we're here to help. In this blog post, we'll walk you through the steps of installing laminate wood flooring roll so you can achieve a professional-looking finish.

Step 1: Prepare the Area.

Before you begin installing your laminate wood flooring roll, you need to prepare the area you will be working in. This includes removing any obstacles and cleaning the space thoroughly. Make sure the area is dry and level to ensure a smooth installation.

Step 2: Unroll the Laminate Wood Flooring.

Once you have prepared the area, you can begin unrolling the laminate wood flooring. Make sure you unroll it in the direction you want the planks to be installed. It's essential to acclimatize the roll to the room temperature and conditions for a few days before laying it.

Step 3: Cut the Laminate Wood Flooring.

After unrolling the laminate wood flooring, take measurements of the space you're working in. Use these measurements to cut the laminate wood flooring to the right size. Be sure to leave a 1/8" gap along the edges to allow for expansion during changes in temperature and humidity.

Step 4: Install the Underlayment.

Next, you'll need to install the underlayment. The underlayment is a layer that serves as a barrier between the subfloor and the laminate wood flooring. It helps to reduce noise and create a smooth surface for the laminate flooring to sit on. Once you have installed the underlayment, you can move on to the actual installation of the laminate wood flooring.

Step 5: Lay the First Row.

One of the most critical steps in installing laminate wood flooring roll is laying the first row of planks. This will set the tone for the rest of the installation, so take your time and make sure you get it right. Make sure the planks fit snugly against each other, but leave a 1/8" gap between the planks and wall.

Step 6: Install the Remaining Rows.

After laying the first row, continue to install the remaining rows. Connect the planks by clicking them together and aligning them at a slight angle before pressing them down firmly. Make sure to stagger the end joints of the planks in each row, and use a tapping block and pull bar to ensure they are secure.

Step 7: Cut the Final Row.

Once you have installed the majority of the laminate wood flooring roll, you may need to cut the final row to fit the remaining space. You can do this by taking measurements of the remaining gap and cutting the planks to size with a saw.

Step 8: Install the Baseboards.

The final step in the installation process is to install the baseboards. Use finishing nails to secure the baseboard to the wall, being careful not to nail through the laminate wood flooring.

CONCLUSION:

In conclusion, installing laminate wood flooring roll is not as complicated as it may seem. With the right tools, patience, and attention to detail, you can achieve a professional-looking finish. Remember to take your time, prepare the area correctly, measure everything twice, and use the correct tools. If you're unsure about any steps, refer to the manufacturer's instructions or consider hiring a professional if you're not confident in your DIY skills.

For more information, please visit Laminate Wood Flooring Roll, 0.35mm Wood Grain Luxury Waterproof Laminate Flooring, Foam-Backed Vinyl Flooring.