Roadway Traffic Signal Pole , Driveway Galvanised Steel Pole ...

Roadway Traffic Signal Pole , Driveway Galvanised Steel Pole 11M Height 4M Width

Check now

11M Height 4M Width Roadway Signal Pole Driveway Traffic Light Pole Galvanised Steel Pole

Specification:

 

Surface treatment

Hot dip galvanized Following ASTM A 123, color polyester power or 

any other standard by client required.

Standard

Octagonal tapered column 
Certified by SIRIM QAS INTERNATIONAL. 
Approved by JABATAN KERJA RAYA MALAYSIA. 
Conforms to Standard: 
Pole design : BS EN 40 
Material : BS EN  S275 / JIS G SS400 
Welding : BS  
Galvanizing : BS 729 / ISO  ASTM A 123

Length of per section

Within 14m once forming without slip joint.

Suit for

Highway 
Roadway 
Residential subdivisions 
Commercial development

Option

Height from 6m to 12m 
Flange mounted or planted type 
Variable arm length from 0.125m to 3.0m with single or double arm type 
Variable spigot size from 35mm to 60mm.

Production Process

Raw material test &#; Cutting &#;Molding or bending &#;Welidng (longitudinal )&#;

Dimension verify 

&#;Flange welding &#;Hole drilling &#;Calibration &#;Deburr&#;Galvanization or 

powder coating ,

painting &#;Recalibration &#;Thread

&#;Packages

 

 

 

Our service:

FAMA contains other products and information you need, so please check it out.

 

1. Reply your inquiry in 24 working hours.

2. Experienced staffs answer all your questions in fluent English. 

3. Customized design is available. UEM&UBM are welcomed. 

4. Exclusive and unique solution can be provided to our customer by our 

    well- trained and professional engineers and staff.    

5. Special discount and protection of sales are provided to our distributer

6. Professional manufacturer : We are manufacturer, specializing in producing all kinds of steel poles for

 more 

   than 20 years, competitive with good quantity.

7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the 

shipment 

   charges is usually paid by your side, the charges will be rebounded when we have formal order.

8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to 

ensure 

   our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.

 

The position of the light fixture is as important as the selection of light fixture in order to illuminate correctly to streets, roads, and sidewalks. You will not achieve the desired performance when you do not locate the light fixture correctly.

The height of the lighting pole to be used is related to the width of the area to be illuminated. 4-5-6 meters height of lighting poles are used in sidewalks and bicycle roads. 8-10 meters lighting poles are preferred in narrow streets and byroads. 10-12 meters height of lighting poles are used in boulevards, commercial and industrial areas.

There will be too bright and too dark spots when the height of the pole is not in proper measure.

If the distance between poles are high, you will use less pole and light fixture. This will reduce the cost. The distance between poles are related to the height of the pole to be used. If the height of the lighting pole is high, the distance between the poles will also be high. If we need to give a general ratio in this regard, it would be appropriate to leave 2,5-3 times the height of the pole between the two poles. For instance, in projects where 6 meters lighting pole is used, 15-18 meters distance can be left between the poles.

If the distance between poles are too high, there may be dark spots between two poles. If the distance between poles are too low, there may be bright areas between two poles.

The width of the area illuminated by the lighting fixture is roughly equal to the height of the lighting pole. In other words, a light fixture mounted on 12 meters height of a lighting pole can illuminate 12 meters width of road (lane width 3-3.5 meters) or area.

It is sufficient to illuminate one side of the road in narrow streets. In wider streets, it may be necessary to position the lighting poles on both sides of the road (opposite or shifted).

Factors such as speed limit, traffic density and crime rate that determine the class of road lighting should be considered in determining the height of the mast and the distance between the poles. The total light output and light distribution of the light fixture should also be considered in determining the height of the pole.

It should be verified by computer simulation software that the lighting pole and light fixture combination meets the standard requirements for road lighting.

If you want to learn more, please visit our website what is the height of a traffic light pole.