Thermoelectric wine cooler drying and curing - DIY

Hole in the fridge from the front


Hole from the back of the fridge with wire through. I had not taped up and protected the power for the humidifier here yet, I did that later.


Humidifier in place. It just sets there with the fins in the channel that drains to the tray under the fridge. At first I worried about the tray filling up but it is designed to evaporate out fairly quickly, it never had more that a dozen tablespoons or so of water in it. The Inkbird sensor is next to it, I ended up mounting the sensor with hot glue to the back right of the fridge fan and between shelves where it will not touch anything including your drying flower once loaded up.

Next I drilled the hole in the fridge. I chose lower and to the right, staying away from the power cable and any other fridge parts. It&#;s just thin metal and insulation. I had a half inch hole saw that was the perfect size. I cleaned up the hole so there were no sharp edges that could cut cables, the fed the sensor cable and dehumidifier power cable through. I read in other threads to be careful using silicone to seal the hole, the smell is hard to get rid of. I used hot glue, and two neoprene plugs from an old cloner I had made that I cut down to fit tight. After it was finished I think I could have skipped the hot glue all together.Hole in the fridge from the frontHole from the back of the fridge with wire through. I had not taped up and protected the power for the humidifier here yet, I did that later.Humidifier in place. It just sets there with the fins in the channel that drains to the tray under the fridge. At first I worried about the tray filling up but it is designed to evaporate out fairly quickly, it never had more that a dozen tablespoons or so of water in it. The Inkbird sensor is next to it, I ended up mounting the sensor with hot glue to the back right of the fridge fan and between shelves where it will not touch anything including your drying flower once loaded up.

For more information, please visit thermoelectric wine cooler.

When it comes to the taste and aroma of the wine, lovers of wine exactly know that preserving the wine at the right temperature can help in making a great difference in their beloved beverages. And that is one of the biggest reasons why wine coolers have become widely popular. Not only do people have them for their homes but wine coolers are exchanged as a gift item as well.

With time passing there have been a number of wine coolers introduced. With so many of the wine coolers in the present times, it is pretty confusing for the lovers of wine to which one is suitable for them.

Want more information on built-in wine cooler with LED manufacturer? Feel free to contact us.

Other than the size of the bottles or the configuration, one of the primary things that people realize when on the lookout for a wine cooler is that there are apparently incalculable various sorts of wine coolers to browse and choose from. A large number of these come outfitted with highlights that can without a doubt prove to be useful, yet by the day's end, the greatest thing to see when looking for a wine cooler is its cooling technique. In most of the cases, you can hope to experience two unique kinds of wine coolers: those that use thermoelectric cooling and those which are based on the compressor.

As one would expect, both of these kinds of techniques of cooling have their own interesting working, benefits, cost, etc. Prior to plunging into which kind of wine cooler is appropriate and suitable for you, be that as it may, how about we pause for a minute to go over how each type functions, what are the advantages, or which one is suitable for your pocket?

For more custom refrigerator manufacturersinformation, please contact us. We will provide professional answers.